FLIR Systems

+32 (0) 3665 5100http://www.flir.com

Request Information

Optical Gas Imaging Camera for Use Inside ATEX Zone 2 Locations

The GFx320 Optical Gas Imaging (OGI) camera from FLIR Systems combines proven, innovative technology  with the assurance of third-party certification for use inside ATEX Zone 2 (Class I, Div. II) hazardous locations.

With new stricter global standards for methane emissions, there is a growing need for faster, safer, and more reliable methods to locate and repair hydrocarbon leaks across the oil and natural industry. FLIR Systems, has addressed that need with its intrinsically safe OGI camera - the GFx320. Through thoughtful design the GFx320 meets sensitivity standards such as those defined in US EPA’s new OOOOa methane rule. Beneficially it also automatically tags files with the GPS data often required for regulatory reporting.

Independent testing of the GFx320 to demonstrate compliance with the EPA’s NSPS 40 CFR part 60, subpart OOOOa sensitivity standard for optical gas imaging equipment was performed by the UK National Physical Laboratory (NPL). In these tests, the NPL confirmed that the FLIR GFx320 optical gas imaging camera is capable of imaging a gas that is half methane/half propane at a concentration of 10,000 ppm at a flow rate of less than or equal to 60g/hr from a quarter inch diameter orifice.

The GFx320 optical gas imaging camera is capable of imaging a wide array of gas compounds, but was specifically designed to see the following hydrocarbons: Methane, Benzene, Propane, Butane, Ethane, Ethanol, Ethylbenzene, Ethylene, Heptane, Hexane, Isoprene, MEK, Methanol, MIBK, Octane, Pentane, Propylene, Toluene, Xylene and1-Pentene.

For further information please visit www.flir.co.uk/GFx320 or contact contact FLIR Systems at gasimaging@flir.com or 32-3665-5100.

FLIR Systems, Inc. is a world leader in the design, manufacture, and marketing of sensor systems that enhance perception and awareness. FLIR’s advanced thermal imaging and threat detection systems are used for a wide variety of imaging, thermography, and security applications, including airborne and ground-based surveillance, condition monitoring, research and development, manufacturing process control, search and rescue, drug interdiction, navigation, transportation safety, border and maritime patrol, environmental monitoring, and chemical, biological, radiological, nuclear, and explosives (CBRNE) detection. For more information, go to FLIR’s web site at www.FLIR.com.

Fliratspr151 image

What’s new

  • Fliratspr163 image c

    Thermal Imaging Assists Surgical Procedures

    News | 22 Aug 2017

    FLIR Systems has published an applications article that describes how a leading US university has been using a FLIR A655sc thermal imaging camera to study the effect of temperature on tissue autofluorescence.

  • Fliratspr161 image b

    Thermal Imaging Speeds Up Repair of Printed Circuit Boards

    News | 20 Jul 2017

    FLIR Systems has published an application note that describes how their ETS320 thermal imaging camera is being used by ISOMEDIA GmbH (Stuttgart, Germany) to investigate and speed-up the repair of assembled printed circuit boards (PBA).

  • Fliratspr162 image b

    High Speed Infrared Detectors Aid Ballistic Testing

    News | 11 Jul 2017

    FLIR Systems has published a technical article that discusses the benefits of next-generation ROIC and detector material technologies and how they are pushing the boundaries on high-speed thermal imaging of ballistic testing.

  • Fliratsepromo2017 f image

    Thermal Camera for Electronics Development and Testing

    Products | 4 Jul 2017

    The FLIR ETS320 combines a high-sensitivity thermal camera – engineered for imaging PCBs and other electronics – with an adjustable, hands-free table stand enabling consistent, non-contact thermal testing.

  • FLIR appoints Jim Cannon

    FLIR Systems Appoints James J. Cannon as President & CEO

    News | 23 May 2017

    FLIR Systems, Inc. today announced that James J. (“Jim”) Cannon has been appointed President and Chief Executive Officer, effective June 19, 2017. Mr. Cannon will succeed Andy Teich, whose retirement after 33 years of service was previously announced on February 14, 2017.

Search all our content