Master Bond Inc.

+1-201-343-8983http://www.masterbond.com

Request Information
Categories:Materials

New Product: EP30LTE-2

Master Bond EP30LTE-2 has been developed for joining dissimilar substrates exposed to thermally or mechanically induced stresses.

It can be used for sealing, coating and encapsulating, especially for small to medium sized castings where a very low coefficient of thermal expansion (CTE) is required.

EP30LTE-2 is a highly dimensionally stable epoxy system with low linear and volumetric shrinkage upon curing. The compressive strength of the cured material is 24,000-26,000 psi and its CTE is very low at 10-13 x 10-6/in/in/°C. It is a reliable electrical insulator featuring volume resistivity of more than 1015 ohm-cm. EP30LTE-2 meets NASA low outgassing specifications and features a combination of physical properties making it ideal for applications in aerospace, optical, electronic and specialty OEM industries where these requirements are critical.

EP30LTE-2 is a two part epoxy which obtains optimal properties when cured overnight at room temperature followed by a heat cure for 2-4 hours at 150-200°F. This system offers moderate flow characteristics with a mixed viscosity ranging from 70,000 to 100,000 cps. In addition to standard packaging units of ½ pint, pint, quart, gallon and 5 gallon kits, the epoxy is available in premixed and frozen syringes.

mb

 

For more information on EP30LTE-2, request a technical data sheet.

What’s new

  • infographic thumbnail ep112ls

    Heat Curing, Two Part System EP112LS

    News | 21 Sep 2018

    Non-Yellowing EPOXY with exceptional optical clarity

  • how to video thumbnail efdsyringe

    How Do You

    News | 14 Sep 2018

    Use An EFD Syringe with A Manual Plunger

  • image

    Industrial Applications

    Products | 10 Sep 2018

    Ultra High Vacuum Compatible Adhesives Systems

  • chemically5

    Top 5 Chemically Resistant Adhesives

    Products | 10 Sep 2018

    Master Bond offers a wide array of epoxies, fluorosilicones and light curing products that are formulated to withstand exposure to many chemicals, including acids, bases, solvents, alcohol, fuel, water and more.

  • case study uv15

    Case Study

    News | 24 Aug 2018

    How UV15 was utilized in electro-optical waveguides

Search all our content